|
Touch up paint: Automotive touch up paint Tips1. Always read specific can instructions to achieve maximum results. 2. A clean, dry surface is important. Follow these preparation tips for best results: • Remove dirt, wax, grease, moisture, rust and loose paint. • Sand or scrape, if necessary, (sandpaper, steel wool, wire brush, scraper). • Sand rusted, glossy or hard surfaces to improve adhesion. 3. Paint in good weather only. • 55° to 75° F is ideal; 40 to 60% relative humidity is recommended • Avoid direct sunlight and hot, humid weather. 4. Observe the proper re-coat opportunities. See product directions for suggestions on when to apply a second coat. 5. Test a small surface area for paint compatibility. 6. A smooth, even application is important. Follow these tips for success: • Use an even, side-to-side motion with each pass beginning and ending beyond the edge of the object. • Use a fan spray vs. regular spray distance to the object. 7. Take your time. • Use 3 light coats vs. one thick coat. • Always check recommended recoat time. 8. Avoid over spraying. • Mask exposed areas with drop cloths. • Clean up with appropriate cleaner-paint thinner or soap and water. 9. Ensure adequate ventilation. |
|