|
Touch up paint: Automotive touch up paint: Spray Can DirectionsAlways start by washing the area that you are painting with soap and water. Then wipe the area down with wax and grease remover. You should then lightly scuff the area that you are painting with a gray scotch brite pad, this will give the paint something to stick to. If using primer use a red scotch brite pad before applying primer. After applying primer wait 1 hour (or until fully dried), and then sand with 600 grit sandpaper.First test the spray can on something besides your car. Do this to get used to how the can sprays. Then spray the area that you are repairing with 2 to 3 coats of color (or until full coverage is achieved). Wait 5 minutes between coats. If you are using clearcoat wait 30 minutes before starting to apply the clearcoat. Apply 2 to 3 coats waiting 5 minutes between coats. All of these products are available through our Touch Up Paint Secure Ordering Site |
|